Stainless steel elbow: used for rotating pipe. Flanges are used to connect pipes to each other and to the ends of pipes. Tee pipe is used at the junction of three pipes. The cross pipe is the place where four pipes intersect; Reducers are used where two pipes with different diameters meet.

Performance advantages of the product:

1. Corrosion resistance: except for some hydrogenation agents, it can withstand the corrosion of various chemical media, and has good acid resistance, alkali resistance, corrosion resistance, rust resistance, corrosion resistance and reproducibility.

2. Environmental protection and health: The material of stainless steel elbow is composed of carbon and hydrogen, and does not contain toxic heavy metal salt stabilizer. The hygienic performance of the material has been tested by the national agency.

3. Good heat resistance: water temperature 70 ℃, softening temperature 140 ℃.

4. Light weight: the density of stamping elbow is 0.89-0.91g/cm, which is one tenth of that of steel pipe. Because of its light weight, it can significantly reduce the transportation cost and installation construction strength.

5. Strong impact resistance: the unique impact strength performance is greatly improved compared with other solid wall pipes, and the ring stiffness is 1.3 times of that of solid wall pipes

6. Good heat storage performance: due to the low thermal conductivity of the material, the thermal conductivity at 20 ℃ is 0.21-0.24W/mk, which is far less than steel pipe (43-52W/mk) and purple steel pipe (333W/mk). Therefore, PP-R pipe has excellent thermal insulation.

180 ° stainless steel elbow

The stainless steel elbow has reliable and safe connection, convenient and fast construction, excellent health and environmental protection performance, small flow and pressure loss, strong system compatibility, both open and concealed installation, maintenance free, excellent economic performance, wide application range, etc. It is suitable for the transportation of low pressure fluid for hot water, cold water, direct drinking water, heating, air conditioning, fire protection, gas and other consumer costs, as well as the transportation of low pressure fluid in other industries. Pharmaceutical, beverage, food and chemical industries.